WESTERLY 32 RENOWN
Description
We have sloop data only. LWL 25 Beam 9.5 Draft 4.5 (fin keel) Disp. 4922 kg Ballast 1900 kg Produced from 1972-1980
The standard boat dimensions
| i | 39 ft |
|---|---|
| j | 11.20 ft |
| p | 30.10 ft |
| e | 12.50 ft |
| p2 | - |
| e2 | - |
| I | J | P | E | P2 | E2 |
|---|---|---|---|---|---|
| 39 ft | 11.20 ft | 30.10 ft | 12.50 ft | - | - |
Sails
An asterisk indicates that a computer algorithm was used to determine the dimension based on sailboat rig dimensions (usually the I, J, E, and P)
| Sail Type | SPINNAKER |
|---|---|
| Luff | * 38.55 ft - (11750 mm) |
| MidGirth | * 20.16 ft - (6145 mm) |
| Foot | * 20.16 ft - (6145 mm) |
| Perc LP | * 180 |
| Area | * 661 ft² |
| Sail Type | DRIFTER |
|---|---|
| Luff | 35 ft - (10668 mm) |
| Foot | 20 ft - (6096 mm) |
| Leech | 32 ft - (9754 mm) |
| Perc LP | * 161.25 |
| Length Perp | * 18.06 |
| Deck Angle | * 9.4 ° |
| Area | * 316.11 ft² |
| Sail Type | ASYMMETRICAL |
|---|---|
| Luff | 39 ft - (11887 mm) |
| Foot | 19 ft - (5791 mm) |
| Leech | 36.75 ft - (11201 mm) |
| Perc LP | * 165 |
| Area | * 556 ft² |
| Sail Type | MAINSAIL |
|---|---|
| Luff | * 30.1 ft - (9174 mm) |
| Foot | * 12.5 ft - (3810 mm) |
| Leech-AftHdBd | * 31.91 ft - (9726 mm) |
| Tack Ang | * 88 ° |
| Diag (clew/head) | * 32.19 ft - (9812 mm) |
| Head (inches) | * 6 in |
| Area (no Roach) | * 194.65 ft² |
| Sail Type | GENOA |
|---|---|
| Luff | * 38.55 ft - (11750 mm) |
| Foot | * 17.88 ft - (5450 mm) |
| Leech | * 36.52 ft - (11131 mm) |
| Percentage LP | * 150 % |
| Length Perpendicular | * 16.8 ft - (5121 mm) |
| Deck Angle | * 4 ° |
| Area | * 323.8 ft² |
| Sail Type | JIBSAIL |
|---|---|
| Luff | * 32.46 ft - (9894 mm) |
| Foot | * 14.59 ft - (4447 mm) |
| Leech | * 28.66 ft - (8736 mm) |
| Percentage LP | * 115 % |
| Length Perpendicular | * 12.88 ft - (3926 mm) |
| Deck Angle | * 12.01 ° |
| Area | * 209.02 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite.