TRAPPER 28
Description
The TRAPPER 28 is a compact cruiser designed by C&C Design. She strikes a balance between performance and comfort, Her generous sail plan delivers excellent light-air performance. Well-suited for coastal cruising with occasional overnight passages.
Construction Details
| Designer | C&C Design |
|---|---|
| Length | 28.000 ft |
| LOA | 28.170 ft |
| LWL | 22.000 ft |
| Beam | 8.330 ft |
| Displacement | 4775 lb |
| Max Draft | 4.750 ft |
The standard boat dimensions
| i | 33 ft |
|---|---|
| j | 11 ft |
| p | 28.70 ft |
| e | 10 ft |
| p2 | - |
| e2 | - |
| I | J | P | E | P2 | E2 |
|---|---|---|---|---|---|
| 33 ft | 11 ft | 28.70 ft | 10 ft | - | - |
Sails
An asterisk indicates that a computer algorithm was used to determine the dimension based on sailboat rig dimensions (usually the I, J, E, and P)
| Sail Type | SPINNAKER |
|---|---|
| Luff | * 33.05 ft - (10074 mm) |
| MidGirth | * 19.8 ft - (6035 mm) |
| Foot | * 19.8 ft - (6035 mm) |
| Perc LP | * 180 |
| Area | 556.23 ft² |
| Sail Type | MAINSAIL |
|---|---|
| Luff | * 28.7 ft - (8748 mm) |
| Foot | * 10 ft - (3048 mm) |
| Leech-AftHdBd | * 29.94 ft - (9126 mm) |
| Tack Ang | * 87.99 ° |
| Diag (clew/head) | * 30.06 ft - (9162 mm) |
| Head (inches) | * 4.5 in |
| Area (no Roach) | 143.34 ft² |
| Sail Type | GENOA |
|---|---|
| Luff | * 33.05 ft - (10074 mm) |
| Foot | * 17.85 ft - (5441 mm) |
| Leech | * 30.99 ft - (9446 mm) |
| Percentage LP | * 150 % |
| Length Perpendicular | * 16.5 ft - (5029 mm) |
| Deck Angle | * 4 ° |
| Area | 272.62 ft² |
| Sail Type | JIBSAIL |
|---|---|
| Luff | * 27.83 ft - (8483 mm) |
| Foot | * 14.67 ft - (4471 mm) |
| Leech | * 24 ft - (7315 mm) |
| Percentage LP | * 115 % |
| Length Perpendicular | * 12.65 ft - (3856 mm) |
| Deck Angle | * 12 ° |
| Area | 175.99 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite.