Pearson Invicta Ii (Yawl Rig)
Description
The Pearson Invicta II (yawl rig) is a sailboat designed by Bill Tripp. Her generous sail plan delivers excellent light-air performance.
The standard boat dimensions
| i | 39.75 ft |
|---|---|
| j | 15.13 ft |
| p | 35 ft |
| e | 16 ft |
| p2 | 17 ft |
| e2 | 7.75 ft |
| I | J | P | E | P2 | E2 |
|---|---|---|---|---|---|
| 39.75 ft | 15.13 ft | 35 ft | 16 ft | 17 ft | 7.75 ft |
Sails
An asterisk indicates that a computer algorithm was used to determine the dimension based on sailboat rig dimensions (usually the I, J, E, and P)
| Sail Type | MAINSAIL |
|---|---|
| 23 | * 35 |
| 10 | * 16 |
| 24.55 | * 37.68 |
| 88 | * 88 |
| 24.76 | * 37.97 |
| 4.5 | * 6 |
| 118.76 | * 287.53 |
| Sail Type | JIBSAIL |
|---|---|
| Luff | * 19.1 ft - (5822 mm) |
| Foot | * 10.8 ft - (3292 mm) |
| Leech | * 16.29 ft - (4965 mm) |
| Percentage LP | * 115 % |
| Length Perpendicular | * 9.2 ft - (2804 mm) |
| Deck Angle | * 12.01 ° |
| Area | * 87.86 ft² |
| Sail Type | GENOA |
|---|---|
| Luff | 39.5 ft - (12040 mm) |
| Foot | 21.75 ft - (6629 mm) |
| Leech | 36.25 ft - (11049 mm) |
| Percentage LP | * 130.54 % |
| Length Perpendicular | * 19.75 ft - (6020 mm) |
| Deck Angle | * 3.91 ° |
| Area | * 390.12 ft² |
| Sail Type | GENOA |
|---|---|
| Luff | * 40.41 ft - (12317 mm) |
| Foot | * 25.01 ft - (7623 mm) |
| Leech | * 37.55 ft - (11445 mm) |
| Percentage LP | * 150.03 % |
| Length Perpendicular | * 22.7 ft - (6919 mm) |
| Deck Angle | * 3.98 ° |
| Area | * 458.65 ft² |
| Sail Type | MIZZEN |
|---|---|
| Tack Ang | * 88 ° |
| Head (inches) | * 3.5 in |
| Area (no Roach) | 65.78 ft² |
| Sail Type | STORMJIB |
|---|---|
| Luff | * 23.39 ft - (7129 mm) |
| Foot | * 11.82 ft - (3603 mm) |
| Leech | * 18.24 ft - (5560 mm) |
| Perc LP | * 60.01 % |
| Length Perp | * 9.08 ft - (2768 mm) |
| Deck Angle | * 18.98 ° |
| Area | * 106.17 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite.