OCEANIS 350
Description
The OCEANIS 350 is a sailboat designed by Beneteau Yachts. Her generous sail plan delivers excellent light-air performance.
The standard boat dimensions
| i | 41.47 ft |
|---|---|
| j | 12.80 ft |
| p | 35.76 ft |
| e | 11.48 ft |
| p2 | - |
| e2 | - |
| I | J | P | E | P2 | E2 |
|---|---|---|---|---|---|
| 41.47 ft | 12.80 ft | 35.76 ft | 11.48 ft | - | - |
Sails
An asterisk indicates that a computer algorithm was used to determine the dimension based on sailboat rig dimensions (usually the I, J, E, and P)
| Sail Type | GENOA |
|---|---|
| Luff | 41.23 ft - (12567 mm) |
| Foot | * 20.59 ft - (6276 mm) |
| Leech | * 38.87 ft - (11848 mm) |
| Percentage LP | * 150 % |
| Length Perpendicular | * 19.2 ft - (5852 mm) |
| Deck Angle | * 4.01 ° |
| Area | * 395.83 ft² |
| Sail Type | MAINSAIL |
|---|---|
| Luff | * 35.76 ft - (10900 mm) |
| Foot | * 11.48 ft - (3499 mm) |
| Leech-AftHdBd | * 36.81 ft - (11220 mm) |
| Tack Ang | * 87.98 ° |
| Diag (clew/head) | * 37.17 ft - (11329 mm) |
| Head (inches) | * 5.25 in |
| Area (no Roach) | * 209.73 ft² |
| Sail Type | JIBSAIL |
|---|---|
| Luff | 34.72 ft - (10583 mm) |
| Foot | * 16.86 ft - (5139 mm) |
| Leech | * 30.31 ft - (9238 mm) |
| Percentage LP | * 115 % |
| Length Perpendicular | * 14.72 ft - (4487 mm) |
| Deck Angle | * 12.04 ° |
| Area | * 255.51 ft² |
| Sail Type | SPINNAKER |
|---|---|
| Stays | * 41.23 |
| MidGirth | * 23.04 ft - (7023 mm) |
| Foot | * 23.04 ft - (7023 mm) |
| Perc LP | * 180 |
| Area | * 807 ft² |
| Sail Type | ASYMMETRICAL |
|---|---|
| Luff | * 41.23 ft - (12567 mm) |
| Foot | * 21.12 ft - (6437 mm) |
| Leech | * 37.93 ft - (11561 mm) |
| Perc LP | * 165 |
| Area | * 653 ft² |
| Sail Type | STORMJIB |
|---|---|
| Luff | * 23.87 ft - (7276 mm) |
| Foot | * 9.51 ft - (2899 mm) |
| Leech | * 19.81 ft - (6038 mm) |
| Perc LP | * 60 |
| Length Perp | * 7.68 |
| Deck Angle | * 18.99 ° |
| Area | * 91.66 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite.