OCEANIS 281
Description
The OCEANIS 281 is a sailboat designed by Beneteau Yachts. Her generous sail plan delivers excellent light-air performance.
The standard boat dimensions
| i | 33.25 ft |
|---|---|
| j | 10.08 ft |
| p | 29.17 ft |
| e | 11.33 ft |
| p2 | - |
| e2 | - |
| I | J | P | E | P2 | E2 |
|---|---|---|---|---|---|
| 33.25 ft | 10.08 ft | 29.17 ft | 11.33 ft | - | - |
Sails
An asterisk indicates that a computer algorithm was used to determine the dimension based on sailboat rig dimensions (usually the I, J, E, and P)
| Sail Type | MAINSAIL |
|---|---|
| Luff | * 29.17 ft - (8891 mm) |
| Foot | * 11.33 ft - (3453 mm) |
| Leech-AftHdBd | * 30.63 ft - (9336 mm) |
| Tack Ang | * 87.99 ° |
| Diag (clew/head) | * 30.92 ft - (9424 mm) |
| Head (inches) | * 5.25 in |
| Area (no Roach) | * 170.19 ft² |
| Sail Type | JIBSAIL |
|---|---|
| Luff | 27.8 ft - (8473 mm) |
| Foot | * 13.23 ft - (4033 mm) |
| Leech | * 24.35 ft - (7422 mm) |
| Percentage LP | * 114.98 % |
| Length Perpendicular | * 11.59 ft - (3533 mm) |
| Deck Angle | * 11.99 ° |
| Area | * 161.07 ft² |
| Sail Type | GENOA |
|---|---|
| Luff | 33.01 ft - (10061 mm) |
| Foot | * 16.18 ft - (4932 mm) |
| Leech | * 31.16 ft - (9498 mm) |
| Percentage LP | * 150 % |
| Length Perpendicular | * 15.12 ft - (4609 mm) |
| Deck Angle | * 4 ° |
| Area | * 249.53 ft² |
| Sail Type | SPINNAKER |
|---|---|
| Stays | * 33.01 |
| MidGirth | * 18.14 ft - (5529 mm) |
| Foot | * 18.14 ft - (5529 mm) |
| Perc LP | * 180 |
| Area | * 509 ft² |
| Sail Type | ASYMMETRICAL |
|---|---|
| Luff | * 33.01 ft - (10061 mm) |
| Foot | * 16.63 ft - (5069 mm) |
| Leech | * 30.37 ft - (9257 mm) |
| Perc LP | * 165 |
| Area | * 412 ft² |
| Sail Type | STORMJIB |
|---|---|
| Luff | * 19.11 ft - (5825 mm) |
| Foot | * 7.47 ft - (2277 mm) |
| Leech | * 15.92 ft - (4852 mm) |
| Perc LP | * 60.02 |
| Length Perp | * 6.05 |
| Deck Angle | * 19.07 ° |
| Area | * 57.79 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite.