MORRIS 32
Description
The MORRIS 32 is a mid-sized cruiser designed by C. W. (Chuck) Paine. Built for serious cruising, she offers reassuring stability in all conditions, Her generous sail plan delivers excellent light-air performance. A capable coastal cruiser with the ability to handle longer passages comfortably.
Construction Details
| Designer | C. W. (Chuck) Paine |
|---|---|
| Length | 32.000 ft |
| LOA | 32.420 ft |
| LWL | 26.170 ft |
| Beam | 10.500 ft |
| Displacement | 11400 lb |
| Max Draft | 4.250 ft |
The standard boat dimensions
| i | 42.75 ft |
|---|---|
| j | 13.25 ft |
| p | 37 ft |
| e | 12.50 ft |
| p2 | - |
| e2 | - |
| I | J | P | E | P2 | E2 |
|---|---|---|---|---|---|
| 42.75 ft | 13.25 ft | 37 ft | 12.50 ft | - | - |
Sails
An asterisk indicates that a computer algorithm was used to determine the dimension based on sailboat rig dimensions (usually the I, J, E, and P)
| Sail Type | SPINNAKER |
|---|---|
| Stays | * 42.52 |
| MidGirth | * 23.85 ft - (7269 mm) |
| Foot | * 23.85 ft - (7269 mm) |
| Perc LP | * 180 |
| Area | 861.99 ft² |
| Sail Type | MAINSAIL |
|---|---|
| Luff | * 37 ft - (11278 mm) |
| Foot | * 12.5 ft - (3810 mm) |
| Leech-AftHdBd | * 38.48 ft - (11729 mm) |
| Tack Ang | * 88.01 ° |
| Diag (clew/head) | * 38.64 ft - (11777 mm) |
| Head (inches) | * 6 in |
| Area (no Roach) | 230.98 ft² |
| Sail Type | GENOA |
|---|---|
| Luff | * 42.52 ft - (12960 mm) |
| Foot | * 21.32 ft - (6498 mm) |
| Leech | * 40.08 ft - (12216 mm) |
| Percentage LP | * 150 % |
| Length Perpendicular | * 19.88 ft - (6059 mm) |
| Deck Angle | * 4 ° |
| Area | 422.55 ft² |
| Sail Type | JIBSAIL |
|---|---|
| Luff | * 35.81 ft - (10915 mm) |
| Foot | * 17.46 ft - (5322 mm) |
| Leech | * 31.25 ft - (9525 mm) |
| Percentage LP | * 115 % |
| Length Perpendicular | * 15.24 ft - (4645 mm) |
| Deck Angle | * 12 ° |
| Area | 272.81 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite.