ISLANDER 30
Description
7300 lbs. Disp. 2500 lbs. Ballast 23'4" LWL 8'10.5" Beam 3'8" Draft
Construction Details
| Designer | Islander Yachts |
|---|---|
| Length | 29.083 ft |
| LOA | 29.580 ft |
| LWL | 23.330 ft |
| Beam | 8.830 ft |
| Displacement | 8400 lb |
| Max Draft | 3.670 ft |
The standard boat dimensions
| i | 32.75 ft |
|---|---|
| j | 10.75 ft |
| p | 28.01 ft |
| e | 12.50 ft |
| p2 | - |
| e2 | - |
| I | J | P | E | P2 | E2 |
|---|---|---|---|---|---|
| 32.75 ft | 10.75 ft | 28.01 ft | 12.50 ft | - | - |
Sails
An asterisk indicates that a computer algorithm was used to determine the dimension based on sailboat rig dimensions (usually the I, J, E, and P)
| Sail Type | MAINSAIL |
|---|---|
| Luff | 28.01 ft - (8537 mm) |
| Foot | 12.5 ft - (3810 mm) |
| Leech-AftHdBd | * 30.43 ft - (9275 mm) |
| Tack Ang | * 89.99 ° |
| Diag (clew/head) | 30.67 ft - (9348 mm) |
| Head (inches) | 5 in |
| Area (no Roach) | * 180.26 ft² |
| Sail Type | JIBSAIL |
|---|---|
| Luff | 27 ft - (8230 mm) |
| Foot | 15.75 ft - (4801 mm) |
| Leech | 24.16 ft - (7364 mm) |
| Percentage LP | * 129.86 % |
| Length Perpendicular | * 13.96 ft - (4255 mm) |
| Deck Angle | * 9.38 ° |
| Area | * 188.52 ft² |
| Sail Type | SPINNAKER |
|---|---|
| Stays | * 32.75 |
| MidGirth | * 19.35 ft - (5898 mm) |
| Foot | * 19.35 ft - (5898 mm) |
| Perc LP | * 180 |
| Area | * 539 ft² |
| Sail Type | GENOA |
|---|---|
| Luff | 32.25 ft - (9830 mm) |
| Foot | 19 ft - (5791 mm) |
| Leech | 31.25 ft - (9525 mm) |
| Percentage LP | * 165.77 % |
| Length Perpendicular | * 17.82 ft - (5432 mm) |
| Deck Angle | * 2.09 ° |
| Area | * 287.41 ft² |
| Sail Type | ASYMMETRICAL |
|---|---|
| Luff | * 32.75 ft - (9982 mm) |
| Foot | * 17.74 ft - (5407 mm) |
| Leech | * 30.13 ft - (9184 mm) |
| Perc LP | * 165 |
| Area | * 436 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite.