Irwin 33 Tall Sloop

Description

The Irwin 33 is a fiberglass masthead sloop designed by Ted Irwin and built by Irwin Yachts in Clear Lake, Texas, from 1974 to 1975. As the original version before the refined Mk II, it was aimed at racer-cruisers seeking a balance of performance and comfort, with some units optimized for IOR racing. The design draws from Ted Irwin's competitive sailing experience, featuring a wide beam for stability and interior volume. About 40-50 were produced, making it a collector's item today. 10950 lbs. Disp. 4200 lbs. Ballast 27'6" LWL 11'2" Beam 5'6" Draft Full Keel

Construction Details

Designer Ted Irwin
Builder Irwin Yachts
Length 33.000 ft
Request A Sail Quote

The standard boat dimensions

i 44 ft
j 14 ft
p 37.50 ft
e 11 ft
p2 -
e2 -
i2 -
j2 -

Sails

Sail Type MAINSAIL
Luff * 37.5 ft - (11430 mm)
Foot * 11 ft - (3353 mm)
Leech * 38.47 ft - (11726 mm)
Tack Angle * 88 °
Diagonal * 38.71 ft - (11799 mm)
Head (inches) * 5.25 in - (133 mm)
Area * 213.18 ft²
Sail Type JIBSAIL
Luff * 36.94 ft - (11259 mm)
Foot * 18.5 ft - (5639 mm)
Leech * 32.37 ft - (9866 mm)
Percentage LP * 115.79 %
Length Perpendicular * 16.21 ft - (4941 mm)
Deck Angle * 11.18 °
Area * 299.35 ft²
Sail Type GENOA
Luff * 43.86 ft - (13369 mm)
Foot * 22.56 ft - (6876 mm)
Leech * 41.62 ft - (12686 mm)
Percentage LP * 150.71 %
Length Perpendicular * 21.1 ft - (6431 mm)
Deck Angle * 3.08 °
Area * 462.72 ft²
Sail Type ASYMMETRICAL
Luff 44 ft - (13411 mm)
Foot 24 ft - (7315 mm)
Leech 41 ft - (12497 mm)
Perc LP * 165 %
Area * 792 ft²
Sail Type SPINNAKER
Stays * 43.86 ft - (13369 mm)
MidGirth * 25.2 ft - (7681 mm)
Foot * 25.2 ft - (7681 mm)
Perc LP * 180 %
Area * 939 ft²
Sail Type STORMJIB
Luff * 25.4 ft - (7742 mm)
Foot * 10.47 ft - (3191 mm)
Leech * 20.91 ft - (6373 mm)
Perc LP * 60 %
Length Perp * 8.4 ft - (2560 mm)
Deck Angle * 19.01 °
Area * 106.67 ft²

Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.