Intrepid 28

Intrepid 28

Description

The Intrepid 28 was designed by Canadian naval architect Rolf van der Sleen. It was designed and built in the late 70's by Intrepid Yachts. Relatively few, ten were built. It has a fin keel with a skegged rudder and a masthead rig.

Construction Details

Designer Rolf van der Sleen
Builder Intrepid Yachts
Length 28.000 ft
LOA 28.000 ft
LWL 24.500 ft
Beam 9.500 ft
Displacement 7500 lb
Ballast 3100 lb
Max Draft 4.820 ft
Year Built 1979
Request A Sail Quote

The standard boat dimensions

i 36 ft
j 11.92 ft
p 30.92 ft
e 10.50 ft
p2 -
e2 -
i2 -
j2 -

Sails

Intrepid 28 - MAINSAIL

Luff * 30.92 ft - (9424 mm)
Foot * 10.5 ft - (3200 mm)
Leech * 32.1 ft - (9784 mm)
Tack Angle * 88 °
Diagonal * 32.31 ft - (9848 mm)
Head (inches) * 4.5 in - (114 mm)
Area * 167.23 ft²
Edit in Calculator

Intrepid 28 - JIBSAIL

Luff * 30.34 ft - (9248 mm)
Foot * 15.88 ft - (4840 mm)
Leech * 26.2 ft - (7986 mm)
Percentage LP * 115.02 %
Length Perpendicular * 13.71 ft - (4179 mm)
Deck Angle * 11.99 °
Area * 207.98 ft²
Edit in Calculator

Intrepid 28 - JIBSAIL

Luff 34.167 ft - (10414 mm)
Foot 17 ft - (5182 mm)
Leech 30.25 ft - (9220 mm)
Percentage LP * 126.17 %
Length Perpendicular * 15.04 ft - (4584 mm)
Deck Angle * 9.45 °
Area * 256.96 ft²
Edit in Calculator

Intrepid 28 - GENOA

Luff * 36.03 ft - (10982 mm)
Foot * 19.33 ft - (5892 mm)
Leech * 33.8 ft - (10302 mm)
Percentage LP * 150 %
Length Perpendicular * 17.88 ft - (5450 mm)
Deck Angle * 4.02 °
Area * 322.1 ft²
Edit in Calculator

Intrepid 28 - GENOA

Luff 34.167 ft - (10414 mm)
Foot 17.5 ft - (5334 mm)
Leech 31.75 ft - (9677 mm)
Percentage LP * 135.23 %
Length Perpendicular * 16.12 ft - (4913 mm)
Deck Angle * 4.59 °
Area * 275.37 ft²
Edit in Calculator

Intrepid 28 - ASYMMETRICAL

Luff 37 ft - (11278 mm)
Foot 20 ft - (6096 mm)
Leech 35 ft - (10668 mm)
Perc LP * 165 %
Area * 555 ft²
Edit in Calculator

Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.

Comments

sailboat bimini

© 2025 Good Old Boat, Inc. All rights reserved