FRERS 41 TALL
Description
The Frers 41 is a highly regarded performance cruiser-racer designed by renowned Argentine naval architect German Frers and built by Carroll Marine in Bristol, Rhode Island, USA, starting in 1987–1988 (with most production in 1988–1989). It was one of four Frers collaborations with Carroll Marine (alongside the 30, 33, and 38), specifically aimed at the emerging IMS rule to promote well-built, seaworthy dual-purpose boats with comfortable accommodations and competitive speed—Frers described it as combining fast hull/foil shapes with moderate displacement and a practical interior. Construction used fiberglass with a fin keel and spade rudder (some with a small skeg ahead of the rudder), triple-spreader masthead sloop rig, rod rigging, solid vang, and hydraulic backstay for efficiency. Production was limited to 23 hulls total, making it a relatively rare classic from the late-'80s era; it's praised for excellent all-around performance (strong in light-to-moderate winds, good upwind pointing, and rewarding handling), a spacious teak-trimmed interior (two private staterooms, V-berth forward, saloon, galley, head, berths sleeping 6–8 comfortably), and suitability for club racing, coastal/offshore cruising, or IMS-style events,
Construction Details
| Designer | German Frers |
|---|---|
| Builder | Carroll Marine |
| Length | 41.000 ft |
| LOA | 40.500 ft |
| LWL | 31.580 ft |
| Beam | 13.080 ft |
| Displacement | 15950 lb |
| Ballast | 6600 lb |
| Max Draft | 7.250 ft |
| Year Built | 1987 |
The standard boat dimensions
| i | 56 ft |
|---|---|
| j | 15.70 ft |
| p | 48.92 ft |
| e | 14.75 ft |
| p2 | - |
| e2 | - |
| i2 | - |
| j2 | - |
| I | J | P | E | P2 | E2 | I2 | J2 |
|---|---|---|---|---|---|---|---|
| 56 ft | 15.70 ft | 48.92 ft | 14.75 ft | - | - | - | - |
Sails
FRERS 41 TALL - MAINSAIL
| Luff | * 48.92 ft - (14911 mm) |
|---|---|
| Foot | * 14.75 ft - (4496 mm) |
| Leech | * 50.46 ft - (15380 mm) |
| Tack Angle | * 88 ° |
| Diagonal | * 50.6 ft - (15423 mm) |
| Head (inches) | * 6 in - (152 mm) |
| Area | 360.42 ft² |
| Edit in Calculator |
FRERS 41 TALL - JIBSAIL
| Luff | * 46.53 ft - (14182 mm) |
|---|---|
| Foot | * 20.38 ft - (6212 mm) |
| Leech | * 41.23 ft - (12567 mm) |
| Percentage LP | * 115 % |
| Length Perpendicular | * 18.06 ft - (5505 mm) |
| Deck Angle | * 12 ° |
| Area | 419.95 ft² |
| Edit in Calculator |
FRERS 41 TALL - GENOA
| Luff | * 55.25 ft - (16840 mm) |
|---|---|
| Foot | * 25.01 ft - (7623 mm) |
| Leech | * 52.42 ft - (15978 mm) |
| Percentage LP | * 150 % |
| Length Perpendicular | * 23.55 ft - (7178 mm) |
| Deck Angle | * 4 ° |
| Area | 650.59 ft² |
| Edit in Calculator |
FRERS 41 TALL - SPINNAKER
| Stays | * 55.25 ft - (16840 mm) |
|---|---|
| MidGirth | * 28.26 ft - (8614 mm) |
| Foot | * 28.26 ft - (8614 mm) |
| Perc LP | * 180 % |
| Area | 1327.16 ft² |
| Edit in Calculator |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.
Comments
