FRERS 30
Description
The FRERS 30 is a compact cruiser designed by German Frers. She strikes a balance between performance and comfort, Her generous sail plan delivers excellent light-air performance. Well-suited for coastal cruising with occasional overnight passages.
Construction Details
| Designer | German Frers |
|---|---|
| Length | 30.000 ft |
| LOA | 29.500 ft |
| LWL | 26.000 ft |
| Beam | 10.920 ft |
| Displacement | 6900 lb |
| Max Draft | 5.750 ft |
The standard boat dimensions
| i | 40.35 ft |
|---|---|
| j | 11.38 ft |
| p | 35 ft |
| e | 11.32 ft |
| p2 | - |
| e2 | - |
| I | J | P | E | P2 | E2 |
|---|---|---|---|---|---|
| 40.35 ft | 11.38 ft | 35 ft | 11.32 ft | - | - |
Sails
An asterisk indicates that a computer algorithm was used to determine the dimension based on sailboat rig dimensions (usually the I, J, E, and P)
| Sail Type | JIBSAIL |
|---|---|
| Luff | * 33.54 ft - (10223 mm) |
| Foot | * 14.79 ft - (4508 mm) |
| Leech | * 29.69 ft - (9050 mm) |
| Percentage LP | * 115 % |
| Length Perpendicular | * 13.09 ft - (3990 mm) |
| Deck Angle | * 12 ° |
| Area | 219.47 ft² |
| Sail Type | SPINNAKER |
|---|---|
| Stays | * 39.83 |
| MidGirth | * 20.48 ft - (6242 mm) |
| Foot | * 20.48 ft - (6242 mm) |
| Perc LP | * 180 |
| Area | 693.36 ft² |
| Sail Type | GENOA |
|---|---|
| Luff | * 39.83 ft - (12140 mm) |
| Foot | * 18.14 ft - (5529 mm) |
| Leech | * 37.78 ft - (11515 mm) |
| Percentage LP | * 150 % |
| Length Perpendicular | * 17.07 ft - (5203 mm) |
| Deck Angle | * 4 ° |
| Area | 340.02 ft² |
| Sail Type | MAINSAIL |
|---|---|
| Luff | * 35 ft - (10668 mm) |
| Foot | * 11.32 ft - (3450 mm) |
| Leech-AftHdBd | * 36.27 ft - (11055 mm) |
| Tack Ang | * 87.96 ° |
| Diag (clew/head) | * 36.4 ft - (11095 mm) |
| Head (inches) | * 5.25 in |
| Area (no Roach) | 197.88 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite.