FIRST 435 E
Description
23809 lbs. Disp 9259 lbs. Ballast 35'1" LWL 13'3" Beam 7'6" Draft deep 6'5" Draft shoal 1191 SF Sail Area Isomat Rig
The standard boat dimensions
| i | 57.92 ft |
|---|---|
| j | 17.25 ft |
| p | 51.67 ft |
| e | 15.58 ft |
| p2 | - |
| e2 | - |
| I | J | P | E | P2 | E2 |
|---|---|---|---|---|---|
| 57.92 ft | 17.25 ft | 51.67 ft | 15.58 ft | - | - |
Sails
An asterisk indicates that a computer algorithm was used to determine the dimension based on sailboat rig dimensions (usually the I, J, E, and P)
| Sail Type | ASYMMETRICAL |
|---|---|
| Luff | * 57.41 ft - (17499 mm) |
| Foot | * 28.46 ft - (8675 mm) |
| Leech | * 52.82 ft - (16100 mm) |
| Perc LP | * 165 |
| Area | * 1225 ft² |
| Sail Type | STORMJIB |
|---|---|
| Luff | * 33.24 ft - (10132 mm) |
| Foot | * 12.73 ft - (3880 mm) |
| Leech | * 27.83 ft - (8483 mm) |
| Perc LP | * 60 |
| Length Perp | * 10.35 |
| Deck Angle | * 19 ° |
| Area | * 172.07 ft² |
| Sail Type | MAINSAIL |
|---|---|
| Luff | * 51.67 ft - (15749 mm) |
| Foot | * 15.58 ft - (4749 mm) |
| Leech-AftHdBd | * 53.17 ft - (16206 mm) |
| Tack Ang | * 88 ° |
| Diag (clew/head) | * 53.44 ft - (16289 mm) |
| Head (inches) | * 6 in |
| Area (no Roach) | * 413.48 ft² |
| Sail Type | SPINNAKER |
|---|---|
| Stays | * 57.41 |
| MidGirth | * 31.05 ft - (9464 mm) |
| Foot | * 31.05 ft - (9464 mm) |
| Perc LP | * 180 |
| Area | * 1515 ft² |
| Sail Type | GENOA |
|---|---|
| Luff | * 57.41 ft - (17499 mm) |
| Foot | * 27.65 ft - (8428 mm) |
| Leech | * 54.25 ft - (16535 mm) |
| Percentage LP | * 150.03 % |
| Length Perpendicular | * 25.88 ft - (7888 mm) |
| Deck Angle | * 4.02 ° |
| Area | * 742.91 ft² |
| Sail Type | JIBSAIL |
|---|---|
| Luff | * 48.35 ft - (14737 mm) |
| Foot | * 22.59 ft - (6885 mm) |
| Leech | * 42.47 ft - (12945 mm) |
| Percentage LP | * 115.01 % |
| Length Perpendicular | * 19.84 ft - (6047 mm) |
| Deck Angle | * 11.97 ° |
| Area | * 479.66 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite.