Ericson 30+

Description

The Ericson 30 is a classic cruiser-racer sailboat designed by Bruce King and built by Ericson Yachts (USA) between 1966 and 1970, with approximately 150 boats produced. Known for its attractive lines, solid construction, and balanced performance, it was one of the first models from Ericson Yachts, popular for coastal cruising and racing under the Cruising Club of America (CCA) rule. The Ericson 30 helped establish the company’s reputation in the 1960s. It was followed by updated models like the Ericson 30-1, 30-2, and 30+ in the 1970s–1980s, with the original design setting the standard for quality and performance. The + model first appeared in 1979.

Construction Details

Designer Bruce King
Length 30.000 ft
LOA 29.920 ft
LWL 25.330 ft
Beam 10.500 ft
Displacement 9000 lb
Max Draft 5.830 ft
Request A Sail Quote

The standard boat dimensions

i 36.50 ft
j 12.20 ft
p 38.50 ft
e 12.83 ft
p2 -
e2 -

Sails

Sail Type MAINSAIL
23 * 38.5
10 * 12.83
24.55 * 39.88
88 * 88
24.76 * 40.15
4.5 * 6
118.76 * 255.24
Sail Type JIBSAIL
Luff * 30.79 ft - (9385 mm)
Foot * 16.28 ft - (4962 mm)
Leech * 26.54 ft - (8089 mm)
Percentage LP * 115 %
Length Perpendicular * 14.03 ft - (4276 mm)
Deck Angle * 12.01 °
Area * 215.97 ft²
Sail Type GENOA
Luff * 36.56 ft - (11143 mm)
Foot * 19.81 ft - (6038 mm)
Leech * 34.27 ft - (10445 mm)
Percentage LP * 150 %
Length Perpendicular * 18.3 ft - (5578 mm)
Deck Angle * 4.03 °
Area * 334.53 ft²
Sail Type GENOA
Luff 35.5 ft - (10820 mm)
Foot 18.5 ft - (5639 mm)
Leech 33.25 ft - (10135 mm)
Percentage LP * 140.33 %
Length Perpendicular * 17.12 ft - (5218 mm)
Deck Angle * 3.75 °
Area * 303.97 ft²
Sail Type ASYMMETRICAL
Luff 37 ft - (11278 mm)
Foot 21 ft - (6401 mm)
Leech 35 ft - (10668 mm)
Perc LP * 165 %
Area * 583 ft²
Sail Type SPINNAKER
Stays * 36.56 ft - (11143 mm)
MidGirth * 21.96 ft - (6693 mm)
Foot * 21.96 ft - (6693 mm)
Perc LP * 180 %
Area * 682 ft²

Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite.