CHEETAH 30
Description
The CHEETAH 30 is a mid-sized cruiser designed by Bob Ames. This performance-oriented design emphasizes speed and agility, with a deep keel providing excellent upwind performance and stability. A capable coastal cruiser with the ability to handle longer passages comfortably.
Construction Details
| Designer | Bob Ames |
|---|---|
| Length | 30.000 ft |
| LOA | 30.250 ft |
| LWL | 27.000 ft |
| Beam | 8.000 ft |
| Displacement | 2300 lb |
| Max Draft | 7.000 ft |
| Min Draft | 1.670 ft |
The standard boat dimensions
| i | 27.58 ft |
|---|---|
| j | 10.10 ft |
| p | 34.58 ft |
| e | 12.25 ft |
| p2 | - |
| e2 | - |
| I | J | P | E | P2 | E2 |
|---|---|---|---|---|---|
| 27.58 ft | 10.10 ft | 34.58 ft | 12.25 ft | - | - |
Sails
An asterisk indicates that a computer algorithm was used to determine the dimension based on sailboat rig dimensions (usually the I, J, E, and P)
| Sail Type | MAINSAIL |
|---|---|
| Luff | * 34.58 ft - (10540 mm) |
| Foot | * 12.25 ft - (3734 mm) |
| Leech-AftHdBd | * 36.13 ft - (11012 mm) |
| Tack Ang | * 88 ° |
| Diag (clew/head) | * 36.28 ft - (11058 mm) |
| Head (inches) | * 5.25 in |
| Area (no Roach) | 211.56 ft² |
| Sail Type | GENOA |
|---|---|
| Luff | * 27.9 ft - (8504 mm) |
| Foot | * 16.6 ft - (5060 mm) |
| Leech | * 25.99 ft - (7922 mm) |
| Percentage LP | * 150 % |
| Length Perpendicular | * 15.15 ft - (4618 mm) |
| Deck Angle | * 4 ° |
| Area | 211.36 ft² |
| Sail Type | JIBSAIL |
|---|---|
| Luff | * 23.5 ft - (7163 mm) |
| Foot | * 13.71 ft - (4179 mm) |
| Leech | * 19.94 ft - (6078 mm) |
| Percentage LP | * 115 % |
| Length Perpendicular | * 11.62 ft - (3542 mm) |
| Deck Angle | * 12 ° |
| Area | 136.43 ft² |
| Sail Type | SPINNAKER |
|---|---|
| Stays | * 27.9 |
| MidGirth | * 18.18 ft - (5541 mm) |
| Foot | * 18.18 ft - (5541 mm) |
| Perc LP | * 180 |
| Area | 431.14 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite.