Catalina 22 Mk Ii
Description
2290 lbs. Disp. 700 lbs. Ballast fin keel. 19'4" LWL. 8'4" Beam. 3'6" Draft Fin Keel. 2'6" Draft wing keel. 2' Draft CB up. 5' Draft CB Down. Mark II models changed interior only. One-design integrity is preserved.
Construction Details
| Designer | Frank Butler |
|---|---|
| Length | 21.500 ft |
| LOA | 23.830 ft |
| LWL | 19.330 ft |
| Beam | 8.330 ft |
| Displacement | 2290 lb |
| Max Draft | 3.500 ft |
The standard boat dimensions
| i | 25.83 ft |
|---|---|
| j | 8 ft |
| p | 21.83 ft |
| e | 9.67 ft |
| p2 | - |
| e2 | - |
| I | J | P | E | P2 | E2 |
|---|---|---|---|---|---|
| 25.83 ft | 8 ft | 21.83 ft | 9.67 ft | - | - |
Documents
Sails
An asterisk indicates that a computer algorithm was used to determine the dimension based on sailboat rig dimensions (usually the I, J, E, and P)
| Sail Type | MAINSAIL |
|---|---|
| Luff | 21 ft - (6401 mm) |
| Foot | 9.83 ft - (2996 mm) |
| Leech-AftHdBd | 23 ft - (7010 mm) |
| Tack Ang | 88 ° |
| Diag (clew/head) | 23.57 ft - (7184 mm) |
| Head (inches) | 4 in |
| Area (no Roach) | * 109.13 ft² |
| Comments |
Catalina 22 Class Mainsail. Mid-girth - 6 feet 1 inch maximum. Quarter-girth - 3 feet 6 inches maximum. Three quarter-girth - 8 feet 1 inch maximum. Battens - Four in number, with the top batten no nearer than 4' 7" to the head, along a line between the head grommet and the clew grommet. Batten length for "standard" battens are 24" (top) 39" (upper & lower middle) and 29" (bottom). Full batten sails shall be allowed, but all battens must be perpendicular to the luff of the sail and fit in the positions described above. If a combination of "full" and "partial" length battens are used, all must be perpendicular to the luff and partial length battens are limited to the dimensions stated in E.1.e. |
| Sail Type | JIBSAIL |
|---|---|
| Luff | * 21.63 ft - (6593 mm) |
| Foot | * 10.54 ft - (3213 mm) |
| Leech | * 18.88 ft - (5755 mm) |
| Percentage LP | * 115 % |
| Length Perpendicular | * 9.2 ft - (2804 mm) |
| Deck Angle | * 12 ° |
| Area | * 99.5 ft² |
| Sail Type | GENOA |
|---|---|
| Luff | 26.33 ft - (8025 mm) |
| Foot | * 12.87 ft - (3923 mm) |
| Leech | * 24.22 ft - (7382 mm) |
| Percentage LP | 150 % |
| Length Perpendicular | 12 ft - (3658 mm) |
| Deck Angle | * 3.98 ° |
| Area | * 154.14 ft² |
| Comments |
Only the luff length is specified with a maximum of 26.33 feet. The leech and foot can be modified as desired to change clew height and sheet lead angle. The calculator can be especially useful here. Battens are not permitted. |
| Sail Type | DRIFTER |
|---|---|
| Luff | * 25.69 ft - (7830 mm) |
| Foot | * 13.38 ft - (4078 mm) |
| Leech | * 23.13 ft - (7050 mm) |
| Perc LP | * 150 % |
| Length Perp | * 12 ft - (3658 mm) |
| Deck Angle | * 9.04 ° |
| Area | * 154.15 ft² |
| Sail Type | STORMJIB |
|---|---|
| Luff | * 14.87 ft - (4532 mm) |
| Foot | * 5.95 ft - (1814 mm) |
| Leech | * 12.33 ft - (3758 mm) |
| Perc LP | * 60 % |
| Length Perp | * 4.8 ft - (1463 mm) |
| Deck Angle | * 18.98 ° |
| Area | * 35.7 ft² |
| Comments | Storm Jib (70%): Luff - 20 feet (maximum), L.P. - 8 feet 5 inches (maximum) The above sail may be carried on board as a non-racing safety item. |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite.