Cape Dory 330 Cutter Rig
Description
The Cape Dory 330 Cutter Rig is a sailboat designed by Carl Alberg. Her generous sail plan delivers excellent light-air performance.
Construction Details
| Designer | Carl Alberg |
|---|---|
| Length | 33.040 ft |
The standard boat dimensions
| i | 44.75 ft |
|---|---|
| j | 13.75 ft |
| p | 39 ft |
| e | 13 ft |
| p2 | - |
| e2 | - |
| I | J | P | E | P2 | E2 |
|---|---|---|---|---|---|
| 44.75 ft | 13.75 ft | 39 ft | 13 ft | - | - |
Sails
An asterisk indicates that a computer algorithm was used to determine the dimension based on sailboat rig dimensions (usually the I, J, E, and P)
| Sail Type | MAINSAIL |
|---|---|
| Luff | * 39 ft - (11887 mm) |
| Foot | * 13 ft - (3962 mm) |
| Leech-AftHdBd | * 40.41 ft - (12317 mm) |
| Tack Ang | * 88 ° |
| Diag (clew/head) | * 40.68 ft - (12399 mm) |
| Head (inches) | * 6 in |
| Area (no Roach) | * 261.88 ft² |
| Sail Type | GENOA |
|---|---|
| Luff | * 44.47 ft - (13554 mm) |
| Foot | * 22.1 ft - (6736 mm) |
| Leech | * 41.94 ft - (12783 mm) |
| Percentage LP | * 149.96 % |
| Length Perpendicular | * 20.62 ft - (6285 mm) |
| Deck Angle | * 4 ° |
| Area | * 458.5 ft² |
| Sail Type | JIBSAIL |
|---|---|
| Luff | * 37.45 ft - (11415 mm) |
| Foot | * 18.09 ft - (5514 mm) |
| Leech | * 32.73 ft - (9976 mm) |
| Percentage LP | * 114.98 % |
| Length Perpendicular | * 15.81 ft - (4819 mm) |
| Deck Angle | * 12 ° |
| Area | * 296.04 ft² |
| Sail Type | ASYMMETRICAL |
|---|---|
| Luff | 45 ft - (13716 mm) |
| Foot | 23.5 ft - (7163 mm) |
| Leech | 42 ft - (12802 mm) |
| Perc LP | * 165 |
| Area | * 793 ft² |
| Sail Type | GENOA |
|---|---|
| Luff | 43.5 ft - (13259 mm) |
| Foot | 20 ft - (6096 mm) |
| Leech | 40.5 ft - (12344 mm) |
| Percentage LP | * 134.84 % |
| Length Perpendicular | * 18.54 ft - (5651 mm) |
| Deck Angle | * 4.93 ° |
| Area | * 403.31 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite.