Bill Burgess 3.6m Sailing Skiff

Bill Burgess 3.6m Sailing Skiff

Description

The Bill Burgess 3.6m Sailing Skiff is a small, traditional clinker-built (lapstrake) sailing skiff designed and lofted/built by Bill Burgess. It's a lightweight, molded design (approximately 660 lbs / 300 kg molded weight) intended as a classic open daysailer or rowing/sailing utility boat, with conventional thwarts and side benches for seating. This appears to be a one-off or custom/small-production wooden skiff, not a widely mass-produced model.

Construction Details

Designer Bill Burgess
Builder Home Built
Length 11.810 ft
LOA 11.810 ft
Displacement 660 lb
Request A Sail Quote

The standard boat dimensions

i 8.20 ft
j 5.90 ft
p 3.60 ft
e 10 ft
p2 -
e2 -
i2 -
j2 -

Sails

Bill Burgess 3.6m Sailing Skiff - JIBSAIL

Luff 8.2 ft - (2499 mm)
Foot 5.9 ft - (1798 mm)
Leech 9.51 ft - (2899 mm)
Percentage LP * 99.32 %
Length Perpendicular * 5.86 ft - (1786 mm)
Deck Angle 59 °
Area * 24.02 ft²
Edit in Calculator

Bill Burgess 3.6m Sailing Skiff - GAFF MAIN

Luff 3.6 ft - (1097 mm)
Foot 10 ft - (3048 mm)
Leech 14.1 ft - (4298 mm)
Tack Angle * 88 °
Diag (clew/throat) * 10.51 ft - (3203 mm)
Head 9.51 ft - (2899 mm)
Area * 67.96 ft²
Edit in Calculator

Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite. The information on this site is not guaranteed to be accurate. Sailrite offers this content as a service to our community, but takes no responsibility for the reliability of the data provided.

Comments