BENETEAU First Class 10
Description
LWL 9.85 m Beam 2.98 m Draft 1.80 m Disp. 2500kg Ballast 1000kg Produced from 1982-1987
The standard boat dimensions
| i | 37.45 ft |
|---|---|
| j | 12.89 ft |
| p | 40.02 ft |
| e | 13.84 ft |
| p2 | - |
| e2 | - |
| I | J | P | E | P2 | E2 |
|---|---|---|---|---|---|
| 37.45 ft | 12.89 ft | 40.02 ft | 13.84 ft | - | - |
Sails
An asterisk indicates that a computer algorithm was used to determine the dimension based on sailboat rig dimensions (usually the I, J, E, and P)
| Sail Type | MAINSAIL |
|---|---|
| Luff | * 40.02 ft - (12198 mm) |
| Foot | * 13.84 ft - (4218 mm) |
| Leech-AftHdBd | * 41.49 ft - (12646 mm) |
| Tack Ang | * 88.01 ° |
| Diag (clew/head) | * 41.89 ft - (12768 mm) |
| Head (inches) | * 6 in |
| Area (no Roach) | * 283.02 ft² |
| Sail Type | JIBSAIL |
|---|---|
| Luff | 31.68 ft - (9656 mm) |
| Foot | * 17.29 ft - (5270 mm) |
| Leech | * 27.17 ft - (8281 mm) |
| Percentage LP | * 114.97 % |
| Length Perpendicular | * 14.82 ft - (4517 mm) |
| Deck Angle | * 12.02 ° |
| Area | * 234.74 ft² |
| Sail Type | GENOA |
|---|---|
| Luff | 37.63 ft - (11470 mm) |
| Foot | * 21.01 ft - (6404 mm) |
| Leech | * 35.21 ft - (10732 mm) |
| Percentage LP | * 150.04 % |
| Length Perpendicular | * 19.34 ft - (5895 mm) |
| Deck Angle | * 4 ° |
| Area | * 363.89 ft² |
| Sail Type | SPINNAKER |
|---|---|
| Stays | * 37.63 |
| MidGirth | * 23.2 ft - (7071 mm) |
| Foot | * 23.2 ft - (7071 mm) |
| Perc LP | * 180 |
| Area | * 742 ft² |
| Sail Type | ASYMMETRICAL |
|---|---|
| Luff | * 37.63 ft - (11470 mm) |
| Foot | * 21.27 ft - (6483 mm) |
| Leech | * 34.62 ft - (10552 mm) |
| Perc LP | * 165 |
| Area | * 600 ft² |
| Sail Type | STORMJIB |
|---|---|
| Luff | * 21.78 ft - (6639 mm) |
| Foot | * 9.81 ft - (2990 mm) |
| Leech | * 17.54 ft - (5346 mm) |
| Perc LP | * 59.97 |
| Length Perp | * 7.73 |
| Deck Angle | * 18.98 ° |
| Area | * 84.21 ft² |
Disclaimer. Boats are not all the same -- even when produced in the same factory of the same model. Sailrite does its best to publish accurate dimensions, but we often find it worthwhile to have our customers measure their boats carefully before we produce kits for them. You should take the same precautions, especially when the data is not from Sailrite.